Aquarium heater wattage calculator
Heater charts assume a room at about 20 °C (68 °F) and a closed lid. If your room is colder, your tank warmer or the top open, you need more. This calculator scales a manufacturer's rating to your conditions.
How it works
A heater only has to replace the heat the tank loses. Heat loss through the glass grows in proportion to the temperature difference between water and room, and to the tank's surface area (Q = U·A·ΔT). For tanks of similar shape, surface area grows as volume2/3: a tank with 8 times the water has only 4 times the glass. We anchor the formula to a published rating, the Fluval E100 (100 W for up to 120 L at 26 °C water in a 20 °C room), and scale from there:
As a cross-check, the same formula gives 97 W for 150 L at a 5 °C lift, matching EHEIM's 100 W rating (up to about 150 L, 21 °C room, 26 °C water). Every litre that evaporates carries away 2.44 MJ of heat. That's why open-top tanks need noticeably more wattage, and why your top-off volume is a good way to measure it.
| Heater | Rated for | Conditions |
|---|---|---|
| Fluval E50 / E100 / E200 / E300 | 60 / 120 / 250 / 375 L | 26 °C water, 20 °C room |
| EHEIM thermocontrol 50 / 100 / 150 W | 25–60 / 100–150 / 200–300 L | closed tank, 21 °C room, 26 °C water |
| Aqueon 50 / 100 / 150 / 200 / 300 W | 5–20 / 15–40 / 30–55 / 50–75 / 65–90 US gal | not stated |
Worked examples
60 L nano, 20 °C room, 26 °C water
Loss = 100 × (60/120)^(2/3) × 6/6 = 63 W. With 25% headroom that's 79 W, so a 100 W heater. (Fluval rates its 50 W for 60 L at these exact conditions with no headroom, so our figure is deliberately cautious.)
75 US gal in a 65 °F room, kept at 78 °F
75 US gal = 283.9 L, and the lift is 13 °F = 7.2 °C. Loss = 100 × (283.9/120)^(2/3) × 7.2/6 = 214 W, or 267 W with headroom: one 300 W or two 150 W heaters. If it's open-top and you top off a quarter gallon a day, add 27 W, which tips it to two 200 W heaters.
Why two heaters?
Two smaller heaters give the same total but fail more safely. If one sticks on, it's too small to cook the tank alone. If one dies, the other keeps the tank from crashing. For tanks needing more than 300 W, the calculator splits the total automatically. A separate temperature controller adds another layer of protection.
Limits
- Lights, pumps and filters add heat. Ignoring them makes this estimate conservative.
- Drafts, cold floors, basements and glass on a cold outside wall increase losses. Use the coldest room temperature you expect.
- Unusual shapes (very shallow or very tall tanks) have more surface for their volume than the reference tank.
References
- Fluval E-series heater instruction manual (ratings at 26 °C water, 20 °C room)
- Aqueon heater wattage guidelines (PDF)
- EHEIM thermocontrol ratings as compiled by Aquarium Stocking (maker specs)
- Engineering ToolBox: Water heat of vaporization vs temperature (2441.7 kJ/kg at 25 °C)
- Incropera, F.P. et al. Fundamentals of Heat and Mass Transfer, Wiley (overall heat transfer, Q = U·A·ΔT)
Formulas on this page are checked by automated unit tests against the reference values above. Last reviewed October 29, 2026. Found an error? Tell us.
More calculators
Tank volume & water weight
Rectangular, cylinder and bow-front tanks, in litres and gallons, plus how much the water weighs.
Water change & dilution
What a water change does to nitrate, salinity or hardness, how much to change to hit a target, and RO/tap blends.
Fertilizer dosing (dry salts)
Grams to ppm and back for KNO₃, KH₂PO₄, K₂SO₄ and Epsom salt, plus stock solutions and an EI-style planner.
CO₂ from pH & KH
Dissolved CO₂ from your pH and KH readings, with temperature correction, and the pH that matches your target.
Salinity & specific gravity
Convert hydrometer SG to ppt with temperature correction (EOS-80), and see what your instrument should read.